LINETRAXX® MRCDB300 series
The AC/DC sensitive MRCDB300 device series is used as additional protection (protection against indirect contact) in earthed systems (TN and TT systems) in which AC or DC fault currents may occur.
Part of these systems are particularly loads containing six-pulse rectifiers or one-way rectifiers with smoothing, such as converters, battery chargers, construction site equipment with frequency-controlled drives. When the response value IΔn2 (alarm) is reached, the output relays K1 and K2 switch.
By using an MRCDB300 module and a switching element with isolating properties, the device combination fulfils the requirements of IEC 60947-2 Annex M for an MRCD protective device.
The application is specifically intended for protection goals such as protection of persons, fire protection and plant protection. The switching element must not exceed a switch-off time of 20 ms.
The residual current monitoring modules each consist of the MRCDB300 evaluation electronics and a CTBC20(P)…210(P) series measuring current transformer core. To assemble a complete module, both the electronics and a measuring current transformer core are required; if ordered separately, these two components must then be plugged together and calibrated during commissioning.
The CTBC20P…210P series measuring current transformers feature an integrated magnetic shield and are suitable for applications with high load currents or inrush currents.
The AC/DC sensitive MRCDB300 device series is used as additional protection (protection against indirect contact) in earthed systems (TN and TT systems) in which AC or DC fault currents may occur.
Part of these systems are particularly loads containing six-pulse rectifiers or one-way rectifiers with smoothing, such as converters, battery chargers, construction site equipment with frequency-controlled drives. When the response value IΔn2 (alarm) is reached, the output relays K1 and K2 switch.
By using an MRCDB300 module and a switching element with isolating properties, the device combination fulfils the requirements of IEC 60947-2 Annex M for an MRCD protective device.
The application is specifically intended for protection goals such as protection of persons, fire protection and plant protection. The switching element must not exceed a switch-off time of 20 ms.
The residual current monitoring modules each consist of the MRCDB300 evaluation electronics and a CTBC20(P)…210(P) series measuring current transformer core. To assemble a complete module, both the electronics and a measuring current transformer core are required; if ordered separately, these two components must then be plugged together and calibrated during commissioning.
The CTBC20P…210P series measuring current transformers feature an integrated magnetic shield and are suitable for applications with high load currents or inrush currents.
Caratteristiche
- Structure of a protective device in accordance with IEC 60947-2 Annex M in combination with a circuit breaker providing isolating properties
- Monitoring of the connected circuit breaker by means of contact feedback
- RS-485 interface with Modbus RTU (reading out measured values/setting parameters)
- Integrated switching outputs with two changeover contacts K1 and K2 (galvanically isolated)
- Fulfils the protection goals protection of persons, fire protection and plant protection (depending on the variant)
- Frequency range DC…100 kHz
- Combined test and reset button
- Multicolour LED indicating operation, exceeded response value, disturbances and status messages
- AC/DC sensitive type B measured value acquisition acc. to IEC 60755
- AC/DC sensitive type B+ measured value acquisition acc. to VDE 0664-400
- Exchangeable electronic enclosure without mechanical separation of the primary conductors
- Extension/retrofitting or modification of functionalities in case of changed monitoring requirements
- Insensitive to load currents due to full magnetic shield (CTBC20P…210P only)
- Connection monitoring of the measuring current transformer with cyclical test current
- Use of all MRCDB300 for all CTBC… measuring current transformer sizes
- Supply voltage DC 24 V
Applicazioni
- for MRCD applications
LINETRAXX® MRCDB300 series Variante/i
Composition of an MRCD modue:
Electronic module + Measuring current transformers = MRCD modul
Electronic module
| Type | Supply voltage US | Variant | Art. No. |
|---|---|---|---|
| MRCDB301 | DC 24 V (19.2…28,8 V) | Protection of persons | B74043120 |
| MRCDB302 | DC 24 V (19.2…28,8 V) | Fire protection | B74043121 |
| MRCDB303 | DC 24 V (19.2…28,8 V) | Protection of persons, fire protection and plant protection (freely configurable) | B74043122 |
| MRCDB305 | DC 24 V (19,2…28,8 V) | Protection of persons for applications with pulsed, very high peak load currents (> 1 kA for < 1 s), e.g. welding applications | B74043125 |
Required terminals are included in the scope of delivery.
Measuring current transformers
| Type | Internal diameter | Art. No. |
|---|---|---|
| CTBC20 | 20 mm | B98120001 |
| CTBC20P | 20 mm | B98120002 |
| CTBC35 | 35 mm | B98120003 |
| CTBC35P | 35 mm | B98120004 |
| CTBC60 | 60 mm | B98120005 |
| CTBC60P | 60 mm | B98120006 |
| CTBC120 | 120 mm | B98120007 |
| CTBC120P | 120 mm | B98120020 |
| CTBC210 | 210 mm | B98120008 |
| CTBC210P | 210 mm | B98120021 |
P = full magnetic shield
Accessori opzionali per LINETRAXX® MRCDB300 series
Accessories
| Description | Art. No. |
|---|---|
| Interface converter USB to RS-485 | B95012045 |
| Terminal block for MRCD module* | B74043124 |
| Snap-on mounting for CTBC20 and CTBC20P* | B91080111 |
| Snap-on mounting for CTBC35 and CTBC35P* | B91080112 |
* Included in scope of delivery
Voltage supply
| Typ | max. connected current transformers | Art. No. |
|---|---|---|
| STEP-PS/1 AC/24 DC/1.75 | 14 | B94053111 |
| STEP-PS/1 AC/24 DC/4.2 | 34 | B94053112 |
Download per LINETRAXX® MRCDB300 series
| Nome | Tipo | Dimensione | Lingua | Timestamp | D-/B-Numero |
|---|---|---|---|---|---|
| UKCA - CTxx | Dichiarazioni di conformità | 121.7 KB | 2023/08/0303.08.2023 | ||
| TÜV NORD - AGH150x, CTACx, CTBCx, EDS44x, CTUB10x, MRCDB30x and RCMB30x | Certificatos | 408.6 KB | EN | 2023/10/1111.10.2023 | |
| TÜV NORD - AGH150x, CTACx, CTBCx, EDS44x, CTUB10x, MRCDB30x und RCMB30x | Certificatos | 428.8 KB | DE | 2023/10/1111.10.2023 | |
| MRCDB30x | Dichiarazioni di conformità CE | 87.4 KB | 2022/08/1212.08.2022 | ||
| CTxx | Dichiarazioni di conformità CE | 87.7 KB | 2024/02/0707.02.2024 | ||
| MRCDB300-Serie | Data sheet | 892.3 KB | DE | 2021/08/2525.08.2021 | D00343 |
| MRCDB300 series | Data sheet | 889.6 KB | EN | 2021/08/2525.08.2021 | D00343 |
| MRCDB300-Serie | Quickstarts | 790.8 KB | DE | 2024/01/2525.01.2024 | D00343 |
| MRCDB300 series | Quickstarts | 783.4 KB | EN | 2024/01/2525.01.2024 | D00343 |
| MRCDB300-Serie | Manuali di istruzioni | 2.2 MB | DE | 2021/08/2727.08.2021 | D00343 |
| MRCDB300 series | Manuali di istruzioni | 2.2 MB | EN | 2021/08/2727.08.2021 | D00343 |
| MRCDB300 série | Data sheet | 893.6 KB | FR | 2021/08/2525.08.2021 | D00343 |
| Modulares Fehlerstromgerät MRCD | Flyer | 96.6 KB | DE | 2021/05/1818.05.2021 | |
| Modular Residual Current Device (MRCD) | Flyer | 96.3 KB | EN | 2021/05/1818.05.2021 | |
| Dispositivo de Corriente Residual Modular MRCD | Flyer | 98.2 KB | ES | 2021/05/1818.05.2021 | |
| Dispositivo differenziale separato a toroide esterno MRCD | Flyer | 115.1 KB | IT | 2021/05/1818.05.2021 | |
| MRCDB300 serie | Data sheet | 891.7 KB | ES | 2022/06/0909.06.2022 | D00343 |
| CTBC-Serie | Manuali di istruzioni | 543.1 KB | DE | 2023/11/1616.11.2023 | D00336 |
| CTBC series | Manuali di istruzioni | 538.3 KB | EN | 2023/11/1616.11.2023 | D00336 |